Drywall Repair in Montgomery, TX

Quick answer: Franco BuildWorks repairs drywall throughout Montgomery, TX and Lake Conroe. Around here the damage usually traces to foundation movement in clay-bearing soil, humidity, or water intrusion near the lake. We match Texas textures, finish to the right level for the lighting, and use fire-rated Type X on garage ceilings. We fix the cause, not just the crack. Serving 77316 and 77356.

This page covers drywall repair for Montgomery, TX homeowners. For the full step-by-step guide, see our Drywall Repair service page — or explore all our work in Montgomery.

Around Montgomery, the crack is usually a symptom

Most drywall damage in Montgomery homes is not random — it is the finish surface reporting on something underneath. The clay-bearing soils common around Lake Conroe swell and shrink with our long wet spells and dry summers, and that seasonal foundation movement shows up as cracks at door and window corners, nail pops, and separated corner beads. Patching those without understanding why they appeared just resets the clock until they come back.

Our first job on any drywall repair is to read what the damage is telling us. A single stress crack over a doorway is one thing; a pattern of cracks marching across a room, doors that no longer latch, and separating trim is a foundation conversation, not a spackle conversation. We are honest about which one you have.

Foundation movement, settling, and nail pops

In older Walden, Cape Conroe, and downtown homes, decades of seasonal soil movement leave a fingerprint in the drywall. Diagonal cracks from the corners of openings, popped fasteners as framing moves against the board, and cracked seams along ceilings are typical. We can absolutely repair these to look right again, but we will tell you plainly if the pattern suggests active movement that will simply re-crack a fresh patch.

Where movement is old and settled, a proper repair — re-securing the board, re-taping seams, floating and texturing — holds well. Where it is ongoing, addressing the underlying foundation or drainage first is the only repair that lasts. Selling you a patch over an active problem would just be selling you the same repair twice.

Humidity, water intrusion, and mold near the lake

Southeast Texas humidity and Lake Conroe’s proximity make water a recurring cause of drywall damage. Roof leaks, plumbing leaks, bathroom moisture, and — for low-lying lakeside and near-creek homes — flood intrusion all leave stained, softened, or crumbling drywall. Water-damaged drywall is not just cosmetic: it can harbor mold in this climate, and painting over it traps the problem.

We cut back to sound material, address the moisture source where it is within scope, allow proper drying, and rebuild with appropriate board — including moisture-resistant board in wet areas. On homes recovering from flooding near the lake, we are realistic that the drywall repair is only meaningful once the water source and any trapped moisture are actually handled.

Matching Texas texture and the right finish level

A repair that does not disappear is not a finished repair. Most Montgomery homes carry a sprayed texture — knockdown or orange peel — and matching that texture across a patch is where a lot of repairs give themselves away. We feather and match texture so the repair blends into the surrounding wall rather than reading as a smooth island in a textured field.

Finish level matters too. A Level 4 finish — tape and fasteners coated, with a skim over the joints — is the right target for most textured and matte-painted walls. A Level 5 finish, a full skim coat over the entire surface, is reserved for smooth walls, gloss or semi-gloss paint, and areas raked by side light where every imperfection shows. We finish to what the wall and its lighting actually call for, not to a one-size default.

  • Level 4: coated joints and fasteners with a skim over seams — standard for textured/matte walls
  • Level 5: full skim coat over the whole surface — for smooth walls, gloss paint, and raking light
  • Texture matched to the home’s existing knockdown or orange peel so patches disappear

Garages: Type X is code, not a choice

Garage drywall repairs come with a code detail people often miss. The ceiling of an attached garage — and any wall separating the garage from living space, especially with a room above — is required to be fire-rated Type X gypsum board, typically 5/8 inch. When we repair or replace drywall in these areas, we match that fire-rated assembly rather than patching in ordinary board.

This matters most on the older lakefront homes and on garage-conversion and addition work, where we sometimes find the original fire separation compromised by past repairs. Restoring it correctly is part of doing the repair right, not an optional upgrade.

Drywall Repair in Montgomery: FAQ

Why do the same drywall cracks keep coming back in my Montgomery home?

Because the cause is usually underneath. Clay-bearing soils around Lake Conroe move seasonally, and that foundation movement re-cracks patches placed over it. If the movement is old and settled, a proper repair holds. If it’s active, the foundation or drainage has to be addressed first — we’ll tell you which you have.

Can you match the texture on my walls so the patch doesn’t show?

Yes. Most Montgomery homes have knockdown or orange-peel texture, and matching it is what makes a repair disappear. We feather and spray to blend the patch into the surrounding wall rather than leaving a smooth spot in a textured field. Matching also depends on the paint, which we discuss up front.

My drywall is water-stained near the lake — can you just patch it?

Not responsibly, until the water source is handled. In this humid climate, water-damaged drywall can harbor mold, and painting over it traps the problem. We cut back to sound material, address the moisture source within scope, allow drying, and rebuild with appropriate board — including moisture-resistant board in wet areas.

What’s the difference between a Level 4 and Level 5 finish, and which do I need?

Level 4 coats the joints and fasteners with a skim over the seams and suits most textured or matte-painted walls. Level 5 is a full skim coat over the entire surface, needed for smooth walls, gloss paint, or areas hit by raking light. We finish to what your wall and lighting call for.

Do garage ceiling repairs need special drywall?

Yes. Attached-garage ceilings and walls separating the garage from living space require fire-rated Type X gypsum, typically 5/8 inch. When we repair or replace drywall there, we match that fire-rated assembly rather than using ordinary board. On older homes we sometimes find that separation compromised and restore it correctly.

Other services in Montgomery

Zip codes served in Montgomery: 77316, 77356.

Drywall Repair in Montgomery, TX

Tell us about the space, the scope you have in mind, and your timeline. Franco BuildWorks reviews the details, checks availability, and contacts you to confirm an appointment.

Request Your Estimate Appointment or call 346-229-9538.